Terminal Block
Cable Jointing
Underground Access
Accessories
Uni-Telco Terminal Block (UTTB)
The UTTB is intended to terminate telephone distribution cable and be the connection to multiple dropwires. Dropwires radiate from the UTTB to subscriber’s premises. 10 or 20 pair termination per mount is available.
- External distribution box used to interconnect buried/aerial secondary cables directly to overhead dropwires for customer telephone connections
- Suitable for mounting on poles (steel, wooden), steel boxes, inside pillar by selected mounting fixtures and accessories
- Capacity for 10 pairs and 20 pairs
- Connection and disconnection of dropwires by using IDC termination method
- Available with and without factory terminated cable tail
- Available with protected and unprotected type
- Manufactured from high quality thermoplastic material, resistant to harsh tropical weather, corrosion, splash proof and effects of UV rays
- Dropwire connections are encapsulated in high quality grease
- Exchange side connections are resin encapsulated for complete environmental protection
- Grommets fitted to dropwire entries to retain grease and prevent ingress of contaminants
- For protected version, each leg of the pair are fitted with gas filled ceramic type arrestors to protect the lines against surge voltages
- Suitable for wide range of dropwires with copper or steel conductors with PE, PVC or rubber insulation.
- Conductor Diameter: 0.5mm – 1.12mm (24 AWG – 18.5 AWG)
- Insulator Diameter: 1.0mm – 5.0mm
- Type approved and technically compliant to the specifications by Telekom Malaysia (TM), Sri Lanka Telecom, and Pakistan Telecommunication Company Limited (PTCL)
Uni-Telco Terminal Block (UTTB)
The UTTB is intended to terminate telephone distribution cable and be the connection to multiple dropwires. Dropwires radiate from the UTTB to subscriber’s premises. 10 or 20 pair termination per mount is available.
- External distribution box used to interconnect buried/aerial secondary cables directly to overhead dropwires for customer telephone connections
- Suitable for mounting on poles (steel, wooden), steel boxes, inside pillar by selected mounting fixtures and accessories
- Capacity for 10 pairs and 20 pairs
- Connection and disconnection of dropwires by using IDC termination method
- Available with and without factory terminated cable tail
- Available with protected and unprotected type
- Manufactured from high quality thermoplastic material, resistant to harsh tropical weather, corrosion, splash proof and effects of UV rays
- Dropwire connections are encapsulated in high quality grease
- Exchange side connections are resin encapsulated for complete environmental protection
- Grommets fitted to dropwire entries to retain grease and prevent ingress of contaminants
- For protected version, each leg of the pair are fitted with gas filled ceramic type arrestors to protect the lines against surge voltages
- Suitable for wide range of dropwires with copper or steel conductors with PE, PVC or rubber insulation.
- Conductor Diameter: 0.5mm – 1.12mm (24 AWG – 18.5 AWG)
- Insulator Diameter: 1.0mm – 5.0mm
- Type approved and technically compliant to the specifications by Telekom Malaysia (TM), Sri Lanka Telecom, and Pakistan Telecommunication Company Limited (PTCL)